The campaign is live and the Impressions column has shown a zero for hours. Or you search for your most important keyword and cannot find your ad. You can almost always find the cause if you look in the right order. First you work out whether the ads really are not running or whether you just cannot see them yourself. Then you go from top to bottom through six levels: account, campaign, ad group, ad, keywords and auction. A problem on a higher level stops everything below it. So there is no point in polishing keywords while a payment is stuck.
Two neighbouring problems are not covered here. If your ads are running but conversions are dropping, read the post on a Google Ads performance drop. If the whole account is suspended, read Google Ads account suspended.
As of: status names and menu paths follow the English Google Ads Help, checked on 8 October 2026. Google renames menus and statuses from time to time. The sources are listed at the end of the post.
First: are your ads really not running?
The most common false alarm I see in practice is an ad that is running but does not appear when the advertiser searches for it. So before you change anything, answer this question.
The Impressions column is the truth
Open the campaign overview, set the date range once to “Today” and once to the last seven days, and look at impressions. According to Google, clicks, impressions and cost are usually refreshed every hour. If impressions are showing, your ads are serving. Then you do not have a delivery problem, at most a reach or visibility problem. If there is still a zero after a few hours, continue with the diagnosis path.
Why you often cannot see your own ad
- Google hides it from you. According to Google Help, the system stops showing you your ad if you search for it repeatedly without clicking, because it assumes you are not interested. Your own searches also distort your click-through rate.
- You are not in the target area. If you sit in an office in Cologne and test a campaign for Düsseldorf with the location option “Presence”, you are not part of the audience.
- The time does not match. With an ad schedule, ads only run at the set times, according to Google, and in the time zone of the account.
- The budget is already spent. With a tight daily budget, from my practice the ad often stops running by late morning or afternoon.
- The device is excluded. A bid adjustment of -100 % on a device excludes it, according to Google, and that applies with Smart Bidding too.
The right tool: Ad preview and diagnosis
Instead of searching on Google, use the tool under Tools > Troubleshooting > Ad preview and diagnosis. According to Google, it does not record ad impressions and does not affect your performance statistics. You enter a search term, choose location, language, device and, if needed, an audience, and see whether your ad appears. If it does not, the tool often names the reason.
Know its two limits: the tool only works on the Google Search Network, not on the Display Network, and according to Google it may not reflect all campaign activity. If it reports “Reason unknown”, Google itself names two common scenarios: a campaign in the learning phase, or a keyword with a dash for Quality Score or with low search volume.
Campaign diagnostics is also worth a look. Select a single campaign under Campaigns and open its overview. According to Google, diagnostics checks more than 90 metrics for all campaign types, covering account, ads, audiences, bids and budget among others, and suggests fixes.
The diagnosis path: six levels from top to bottom
Google Ads is built as a hierarchy. An ad can only run if account, campaign, ad group, ad and keyword are all cleared at the same time, and then it has to win the auction. So I check in this order and fix every block as soon as I find it. After that I still look at the next level, because sometimes there are two problems at once.
Step 1: Account
Google usually shows account-level problems as a banner or in your notifications. Read them before you look any further.
- Payment: According to Google, if a payment is declined, your ads may stop running until the payment is received. Some accounts keep serving for a short time, according to Google. You will find the date, the amount and, if available, the reason in the billing summary. Payments are declined by the bank or card issuer, by the way, not by Google. Google recommends adding a secondary payment method as a backup.
- Account budget: If an account budget is set up, Google says no more ads will run once total spend reaches that amount before the end date.
- Suspension or security review: According to Google, campaigns do not run if the account is suspended, under a security review or has billing problems. With a suspension, this is no longer about optimisation but about the appeal, which I describe in the suspension post linked above.
- Advertiser verification: If Google selects your account, you get a deadline. According to Google, the account is paused if you do not submit the documents within the 30-day notice period or do not complete verification within 30 days. Paused accounts cannot run any ads. Some ads may already be restricted during the process, and a status update can take up to five business days. I describe the steps and documents in the post on advertiser verification.
Step 2: Campaign
The Status column in your campaign list tells you a lot once you know the terms:
- Eligible: the campaign can serve ads.
- Eligible (limited): it runs, but according to Google only occasionally, because of a limited budget or limitations of the bid strategy.
- Not eligible: there are no ad groups, or all ad groups, ads or keywords are paused or removed.
- Paused, Removed, Pending, Ended: stopped, deleted, start date in the future, end date passed.
Then I go through these settings:
- Start and end date. “Pending” and “Ended” sound trivial, but from my practice they come up often, especially in copied campaigns that carried over an old end date.
- Budget. According to Google, ads show less often with a low budget because the system respects your spending limit. A budget that only covers a few clicks a day quickly creates hours without impressions in expensive industries.
- Bid strategy and learning period. The bid strategy has its own status: “Learning”, “Limited” or “Misconfigured”. The last one means a conversion-based strategy is missing the right conversions. According to Google, it can take up to around 50 conversion events or 3 conversion cycles for a strategy to adjust to a new target. Google also says ads with very low bids can still serve but enter fewer auctions. From my practice, the same applies to overly ambitious targets: a target CPA far below what the account has achieved so far can push delivery close to zero.
- Ad schedule. Ads only run in the set time slots, and Google uses the account time zone for them. An account with the wrong time zone shifts your whole schedule. How to enter time slots past midnight correctly as two entries and check the schedule after saving is covered in my post on the Google Ads ad schedule.
- Location options. “Presence or interest” is the default and the setting Google recommends. “Presence” only reaches people who are in, or regularly in, your targeted locations. For local service businesses I often find “Presence” the right choice, but then the area has to be large enough. If reach is too low, Google's own troubleshooting suggests switching from “Presence” to “Presence or interest”.
- Audiences. If an audience is set to “Targeting” instead of “Observation”, ads only show to that list. Google explicitly recommends “Observation” for new Search campaigns.
- Language. According to Google Help, the campaign-level language setting for Search campaigns no longer applies from September 2026. Ads are then matched based on their own language. For Performance Max, the setting no longer applies to the Search Network but remains for YouTube, Display, Discover and Gmail. For your diagnosis this means: in Search campaigns, what counts is the language your ads are written in.
- Networks and devices. A Display campaign never appears in Google Search, a Search campaign never on YouTube. Also check whether a device bid adjustment of -100 % is set anywhere.
Step 3: Ad group
This level is quick. Is the ad group paused or removed? Does it have at least one active, approved ad and, for Search campaigns, active keywords? If one of these is missing, nothing runs, even if the campaign says “Eligible”. If you use manual bidding, note the ad group bid for step 6.
Step 4: Ad
In your ad list, the Status column shows whether an ad may run. The “Policy details” column shows the exact reason. The most important statuses according to Google:
- Under review: the review is in progress. According to Google, most ads are reviewed within one business day. The troubleshooting page states 24 to 48 hours, and up to five business days for new accounts and for image or video formats. Every edit to the ad restarts the review, so do not keep editing while it is under review.
- Eligible: the ad complies with the policies and can be shown to all audiences.
- Eligible (limited): it runs, but not in all situations because of policy restrictions, for example around trademarks or gambling.
- Eligible (limited all locations): the ad is restricted by location-based policies.
- Disapproved: content or destination violates a policy, and the ad does not run.
- Not eligible: the campaign or ad group is paused, removed, ended or pending.
You fix disapproved ads directly in the ad or appeal in the Policy manager (Tools > Troubleshooting). According to Google, you can appeal a maximum of three times per ad, with at least 24 hours between appeals. A classic is the “Destination not working” policy: if the landing page returns errors such as 403, 404 or 500 to Google's crawler, the ad is disapproved. How to fix individual disapproval reasons is covered in the post ad disapproved.
One misunderstanding about ad strength: according to Google, it does not directly affect whether your ad serves and is used neither for Ad Rank nor for Quality Score. An ad rated “Poor” still runs. It is just a hint that your headlines and descriptions could be better.
Step 5: Keywords
The Status column in the keyword table distinguishes, according to Google:
- Eligible: the keyword can trigger ads.
- Eligible (limited) with a secondary status: “Low search volume” (too few searches, and the keyword can be reactivated once demand rises), “Below first page bid estimate” (by Google's estimate the bid is not enough for the first page of search results) or “Rarely shown due to low Quality Score”.
- Paused: paused by you. If Google notes that it was paused due to low activity, Google paused it itself because it had no impressions in the last 13 months. This mainly affects accounts that have been dormant for a long time.
- Disapproved: the keyword violates a policy.
- Not eligible: the campaign or ad group is not running.
What each status means is explained in the glossary under keyword status.
Negative keywords that block. A constructed example: a dental practice books the keyword “emergency dentist”, and a shared exclusion list from an old campaign contains “emergency” as a broad match negative keyword. That blocks every search containing “emergency” for this campaign. According to Google, negative keywords do not match close variants. Casing and misspellings are handled automatically, singular, plural and synonyms are not. Whatever does match, they block reliably. Google also warns that using too many negative keywords means reaching fewer potential customers. So check the negatives at ad group and campaign level and the shared lists applied to the campaign.
Keyword conflicts inside your own account. If you have similar keywords in several ad groups or campaigns, according to Google your account still only enters one bid per auction. A keyword with zero impressions is then not broken, it is being outranked by another keyword from your own account. For Search campaigns and Performance Max, Google says: if the search query is identical to a keyword in your Search campaign, the Search campaign takes priority. That is not a fault, but you should know which ad wins.
Step 6: Auction
If every level is cleared and still nothing runs, you are losing the auction. According to Google, Ad Rank decides whether your ad is eligible to show at all and in which position. It is made up of your bid, the quality of your ad and landing page, Ad Rank thresholds, competition, the context of the search and the expected impact of assets. If your ad does not meet the minimum threshold, it does not show.
How to spot the problem:
- The “Search lost IS (rank)” column shows how many impressions you lost because of low Ad Rank. Google names exactly this column in its troubleshooting.
- Keywords with the status “Below first page bid estimate” or “Rarely shown due to low Quality Score”.
Quality Score itself is not used in the auction, according to Google. It is a diagnostic value. A dash instead of a number only means that too few searches match your keyword exactly. So the levers are bid and quality: ad copy that picks up the keyword and a fast landing page that fits the search. From my practice: in expensive niches, a bid well below the usual cost per click is often simply not enough for a single impression.
Special cases
New account: review times and getting to know you
For new accounts, ad review takes up to five business days, according to Google. On top of that comes the “Limited ad serving” policy: for advertisers Google does not yet trust enough, Google can limit impressions, especially for ads that reference other brands and for generic ads without any branding. Google assesses, among other things, account attributes, account maturity, past policy compliance and verification status. Affected advertisers receive a notification in the account. What helps: complete verification, show your brand clearly in ads and on the landing page, and avoid interchangeable copy.
Sensitive industries
In areas such as healthcare or gambling, an ad is often “Eligible (limited)” or disapproved even though campaign and keywords are fine. Google requires certification for gambling ads, and also for online pharmacies and telemedicine, for example. According to Google, mail-order pharmacies in Germany may advertise as long as ads and landing pages do not promote prescription drugs. Here, read the policy details of the ad first before you touch the bids.
Performance Max
Three reasons that only exist here: according to Google, a Performance Max campaign without a primary conversion goal does not enter the review phase at all. Disapproved assets can mean the asset group only serves in a limited way on some networks. And after launch, Google recommends waiting 7 to 14 days for the system to ramp up. If a Search campaign with identical keywords is also running, the Search campaign wins for identical search queries.
Demand Gen
According to Google, a Demand Gen campaign may serve only in a limited way or not at all if an audience list is below the minimum size or if only one postal code, a small radius or a small city is targeted. A target bid that is too far from historic actual performance can also stop delivery. Google recommends adjusting the target gradually, in steps of around 20 %, and avoiding frequent changes.
Shopping and Merchant Center
With Shopping ads and Performance Max with a product feed, the block often sits in Merchant Center. According to Google, every product has one of five statuses: “Under review” (3 to 5 business days for Shopping ads), “Processing” (up to 15 minutes), “Approved”, “Limited” or “Not approved”. Products that are not approved cannot appear on Google, either because of policy violations or data quality issues. Check the product status and the “Needs attention” tab in Merchant Center before you look for faults in Google Ads.
Status messages at a glance
| Status message | Meaning | Fix |
|---|---|---|
| Campaign “Pending” | Start date is in the future | Check start date |
| Campaign “Ended” | End date has passed | Extend or remove end date |
| Campaign “Not eligible” | No active ad groups, ads or keywords | Activate the levels below |
| Campaign “Eligible (limited)” | Budget or bid strategy is holding it back | Check budget and targets |
| Bid strategy “Learning” | Strategy is collecting data after a change | Wait, make no further changes |
| Bid strategy “Misconfigured” | Matching conversions are missing | Check conversion actions and goals |
| Ad “Under review” | Policy review in progress | Do not edit, check status after two business days |
| Ad “Disapproved” | Content or destination violates a policy | Fix it or appeal in the Policy manager |
| Ad “Eligible (limited)” | Only runs partly because of a policy | Read policy details, get certified if needed |
| Ad “Not eligible” | Campaign or ad group is not running | Check the level above |
| Keyword “Low search volume” | Too few searches | Use a more general term or broader match type |
| Keyword “Below first page bid estimate” | Ad Rank is not enough for page 1 | Raise bid or ad quality |
| Keyword “Rarely shown due to low Quality Score” | Quality Score too low | Improve ad copy, landing page or keyword |
| Keyword paused due to low activity | 13 months without impressions | Reactivate if still relevant |
| Product “Not approved” (Merchant Center) | Product cannot appear on Google | Fix the issue in Merchant Center |
Table scrolls sideways
The 10-minute check
- Look at impressions for “Today” and the last 7 days at campaign level
- Test a search term in Ad preview and diagnosis, with your customers' location and device
- Read the banners and notifications in the account
- Billing summary: last payment, payment method, account budget
- Check advertiser verification status and any deadline
- Campaign status, start and end date, bid strategy status
- Check ad schedule, time zone, location option and audience setting
- Ad status and the “Policy details” column, Policy manager if needed
- Go through keyword statuses and shared negative keyword lists
- Add the “Search lost IS (rank)” column
Conclusion: find the level first, then fix it
Ads that are not showing rarely have a mysterious cause. Usually it is a block on exactly one level, and you find it fastest from top to bottom: first check whether the ads are really stopped, then account, campaign, ad group, ad, keywords and finally the auction. Only change something once you know the cause, and then only one thing at a time.
If you have worked through the list and the cause is still unclear, I can take a look at the account: in the Google Ads audit (from €500) I review your account and tell you where it is stuck and what you can fix yourself.
Sources
- Google Ads Help, Troubleshoot when your Search campaign is not running or getting low traffic: support.google.com/google-ads/answer/9208915
- Google Ads Help, Find your ads on Google: support.google.com/google-ads/answer/1704363
- Google Ads Help, Ad preview and diagnosis: support.google.com/google-ads/answer/148778
- Google Ads Help, Location, language, device and audience filters in ad preview: support.google.com/google-ads/answer/9172579
- Google Ads Help, Campaign diagnostics: support.google.com/google-ads/answer/12327514
- Google Ads Help, Data freshness: support.google.com/google-ads/answer/2544985
- Google Ads Help, Declined payments: support.google.com/google-ads/answer/1723046
- Google Ads Help, Ads not running due to account issues: support.google.com/google-ads/answer/13186366
- Google Ads Policies, Advertiser verification: support.google.com/adspolicy/answer/9703665
- Google Ads Policies, Account pausing: support.google.com/adspolicy/answer/9872152
- Google Ads Help, Campaign status and bid strategy status: support.google.com/google-ads/answer/1722131
- Google Ads Help, Learning period duration: support.google.com/google-ads/answer/13020501
- Google Ads Help, Set up an ad schedule: support.google.com/google-ads/answer/6372656
- Google Ads Help, Advanced location options: support.google.com/google-ads/answer/1722038
- Google Ads Help, Language targeting: support.google.com/google-ads/answer/1722078
- Google Ads Help, Bid adjustments: support.google.com/google-ads/answer/2732132
- Google Ads Help, Check your ad status: support.google.com/google-ads/answer/9789379
- Google Ads Help, The ad review process: support.google.com/google-ads/answer/1722120
- Google Ads Policies, Fix a disapproved ad or appeal: support.google.com/adspolicy/answer/9338593
- Google Ads Policies, Destination not working: support.google.com/adspolicy/answer/16428019
- Google Ads Help, Ad strength for responsive search ads: support.google.com/google-ads/answer/9921843
- Google Ads Help, Keyword status: support.google.com/google-ads/answer/2453978
- Google Ads Help, Negative keywords: support.google.com/google-ads/answer/2453972
- Google Ads Help, Keyword match types and prioritisation: support.google.com/google-ads/answer/7478529
- Google Ads Help, Ad Rank: support.google.com/google-ads/answer/1752122
- Google Ads Help, Quality Score: support.google.com/google-ads/answer/6167118
- Google Ads Policies, Limited ad serving: support.google.com/adspolicy/answer/13889491
- Google Ads Policies, Healthcare and medicines: support.google.com/adspolicy/answer/176031
- Google Ads Policies, Gambling and games: support.google.com/adspolicy/answer/6018017
- Google Ads Help, Performance Max campaign not running or getting low traffic: support.google.com/google-ads/answer/12131516
- Google Ads Help, Performance Max and policy review status: support.google.com/google-ads/answer/13363141
- Google Ads Help, Demand Gen: targeting too narrow: support.google.com/google-ads/answer/14718134
- Google Ads Help, Demand Gen: low target bids: support.google.com/google-ads/answer/14718747
- Merchant Center Help, Product status and visibility: support.google.com/merchants/answer/160491
As of: October 2026




