Skip to content
MJ Marketing

Link GA4 to Google Ads: Step-by-Step Guide & Fixes

Link GA4 and Google Ads: required permissions, both setup paths step by step, importing key events without double counting, and fixes for common errors.

Mijo Jurisic

Google Ads Consultant

18 min read
Ink sketch: Two hands plugging together a cable that connects a laptop showing a bar chart to a smartphone showing a search ad, with a small tag hanging from the cable

In short

You link GA4 and Google Ads in GA4 under Admin > Product links > Google Ads links or in Google Ads through the Data manager, with the Editor role in GA4 and administrative access in Google Ads. Auto-tagging has to be on, otherwise ad clicks show up in GA4 as organic traffic or as (not set). Imported key events often start out as secondary, and each real business outcome should count as exactly one primary conversion action, otherwise every sale flows into bidding twice. Differences between the two tools are normal, because Google Ads counts by click date and GA4 by conversion date.

You link GA4 and Google Ads in GA4 under Admin > Product links > Google Ads links, or in Google Ads through the tools icon and the Data manager. You need at least the Editor role in GA4 and administrative access in Google Ads, both on the same Google account. Leave auto-tagging switched on, otherwise campaign data will not reach GA4 cleanly. After that, you import your key events as conversions and decide which of them count as primary, so that no sale flows into your bidding strategy twice.

The link itself takes very little time. What goes wrong afterwards keeps me busy in audits for much longer: campaigns that show up in GA4 as organic traffic, purchases counted twice, numbers nobody trusts anymore. How to set up the conversion tag in Tag Manager is covered in my guide to Google Ads conversion tracking.

As of: 08 October 2026. I checked menu paths, roles and field names against the current GA4 and Google Ads help. Google renames menus regularly. If something is labeled differently in your account, the linked help page will show you the current state.

According to Google's help on linking, Google Ads data shows up in your GA4 reports within 48 hours. Data flows in both directions:

DirectionWhat flowsWhat you use it for
Google Ads to GA4Campaign and ad group data, clicks, impressions, costAcquisition reports and the Advertising section in GA4
GA4 to Google AdsKey events as conversionsGoals and Smart Bidding
GA4 to Google AdsAudiencesRemarketing
GA4 to Google AdsEngagement metricsGA4 columns in Google Ads reports

Table scrolls sideways

The link does not backfill historical data; everything starts flowing from the moment you link or import. And it does not make the numbers in both tools identical. I explain why further down.

Prerequisites: roles, account and manager account

WhereMinimum roleWhat for
GA4 propertyEditor (or Administrator)Create and edit the link
Google Ads account or manager accountAdministrative accessCreate the link
GA4 propertyMarketerImport key events as conversions, change attribution settings
GA4 propertyViewerCheck whether and since when the accounts are linked

Table scrolls sideways

Both permissions have to sit on the same Google account you are signed in with. If your Google Ads account does not appear in the selection, Google says you are probably missing exactly this permission. Without admin access in Google Ads, you can request the link from within GA4, and the Ads account administrators get notified.

Special case: manager account

If you run several accounts through a Google Ads manager account (MCC), link the property directly to the manager account. According to Google's help, this means:

  • The imported GA4 data is available to all client accounts, and accounts you add later are linked automatically (Google help on manager accounts).
  • The link counts as exactly one of the maximum of 400 links per property.
  • If you turn on auto-tagging while linking, it applies to all directly linked accounts.
  • For GA4 audiences to reach the sub-accounts, the manager account has to be set as their audience manager.
  1. In GA4, open Admin and click Google Ads links under Product links.
  2. Click Link, then Choose Google Ads accounts.
  3. Select the account or manager account, click Confirm and then Next.
  4. Enable Personalized Advertising is on by default (more on that below).
  5. Expand Enable Auto-Tagging and turn it on if it is still off in the Ads account.
  6. Click Next, review the summary and click Submit.

The arrow at the end of the row shows you the link details later, including the date linked.

Easy to miss: according to Google's help, when personalized advertising is enabled, events such as add_to_cart, begin_checkout, view_item or session_start are also marked as key events in GA4. Check your list of key events after linking. Whatever newly appears there does not automatically belong in your Google Ads goals, and certainly not as a primary conversion.

  1. In Google Ads, click the tools icon and then Data manager.
  2. Click + Connect Product and under "Data source" choose Google Analytics (GA4) & Firebase.
  3. Under "Link Setup", select your property and click Next.
  4. Turn on the toggles to import app and web metrics and Google Analytics audiences, as Google recommends.
  5. Review your selection and click Link.

Older guides and some Google help pages still describe the path through Linked accounts. Today the link runs through the Data manager (Google help). Both options create the same link. I usually go through GA4, because auto-tagging sits right there in the dialog.

Why auto-tagging has to be on

Auto-tagging appends a click ID, the GCLID, to every ad URL, for example ?gclid=123xyz. GA4 uses it to attribute the session to the right campaign, and without it importing key events as conversions does not work (Google help on auto-tagging). It is on by default for new accounts. You can check it under Admin > Account settings > Auto-tagging: the box "Tag the URL that people click through from my ad" must be ticked.

  • In GA4, auto-tagging takes priority over manual UTM parameters. If GA4 cannot use the GCLID, for example because a redirect cuts it off, it derives all campaign values from whatever UTM parameters are present. So set all UTM parameters, not just one (Google help on traffic sources). You can build clean fallback parameters with the UTM generator. Which values to use consistently is set out in my UTM naming convention.
  • If both the click ID and UTM parameters are missing, the session lands as organic, direct or (not set). In my practice this is the most common reason campaigns seem to vanish from GA4.
  • With cross-account conversion tracking through a manager account, you have to turn on auto-tagging in each sub-account individually.

Personalized advertising: what the toggle controls today

The Enable Personalized Advertising toggle allows GA4 data to be used for personalized advertising in Google Ads, mainly for remarketing. For that, the property also needs Google signals or user-provided data collection to be active.

In 2026 Google is shifting control to Consent Mode. Since 15 June 2026, according to Google's help, Consent Mode alone decides whether the GA4 tag collects Google Ads cookies and identifiers, while Google signals only controls the association with signed-in users in reports. Later in the year, the ad_personalization signal alone is meant to decide whether GA4 data is used for personalization in Google Ads, and GA4 is meant to pass encrypted IP addresses to the linked Ads account. At the time of writing Google had not announced dates for this. What it means for your cookie banner is covered in my article on Consent Mode v2.

Importing key events as conversions

The link alone changes nothing about your bids. Only once you create conversions from key events can Smart Bidding work with them. I describe the basic principle in my article on Google Ads conversion tracking; here are the current paths for the GA4 import.

Step 1: mark the event as a key event

In GA4 under Admin > Data display > Events, switch on "Mark as key event" for the event you want. A new event may first need to fire and appear on the "Recent events" tab.

Step 2: create the conversion

In Google Ads, go to Goals > Summary, click + Create conversion action, choose the property and the event, click Select events and then Save and continue. Alternatively, you can do it in GA4 via Advertising > Tools > Conversion management > New conversion, although according to Google not every property has this view yet (Google help on importing).

You need at least the Marketer role in GA4 and administrative access in Google Ads. It can take up to 24 hours for the first data to appear in Google Ads. Nothing is imported retroactively.

Primary or secondary: what Smart Bidding sees

Google sets conversions created through GA4 to secondary. GA4 conversions created in Google Ads also become secondary if the account already has goals from an Analytics property. According to Google, this is meant to prevent the same event from being counted twice for bidding.

You only see secondary actions in the "All conv." column. Only primary actions flow into the "Conversions" column and therefore into Smart Bidding. If you want to bid on a GA4 conversion, set action optimization to Primary in Google Ads. That is only possible in Google Ads, not in GA4.

Avoiding double counting: Google Ads tag or GA4 import

In my practice this is the most expensive mistake around the link: the purchase is already measured by the Google Ads conversion tag, someone also imports the GA4 purchase event and sets it to primary as well. From then on every purchase counts twice, and Smart Bidding sees a CPA that is only half of the real one. Google only removes duplicates within a single conversion action, not across two different actions (Google help).

The rule: exactly one primary conversion action per real business outcome. The second source runs alongside as secondary, as a check.

SituationPrimarySecondary
Google Ads tag measures the outcome cleanlyConversion action from the Google Ads tagGA4 import for comparison
No Google Ads tag, GA4 measures cleanlyGA4 importnone

Table scrolls sideways

For bidding I almost always use the Google Ads tag as the primary source, ideally with enhanced conversions. It supports view-through conversions, which according to Google are not available with the GA4 import, and it does not depend on the property's attribution settings. If the real deals only happen later in your CRM, that is where measurement belongs, see importing offline conversions.

Using GA4 audiences in Google Ads

With personalized advertising enabled, GA4 audiences arrive automatically in the linked Google Ads accounts, which can take a few hours. Then you add them to campaigns or ad groups. If they are missing, check the following in order, according to Google's troubleshooting help:

  • whether personalized advertising is enabled in the link,
  • whether the user data collection acknowledgment is checked in the property's data collection settings,
  • whether Google signals or user-provided data collection is active,
  • whether, for manager accounts, the manager account is set as audience manager.

GA4 metrics in Google Ads, Google Ads reports in GA4

In Google Ads, add the Google Analytics group through the columns icon in the tables for campaigns, ad groups, ads or keywords, for example "% Engaged sessions (GA4)" or "Events / session (GA4)". This lets you spot keywords with a good click-through rate whose visitors leave right away. According to Google, the data is usually there in under an hour, but it cannot be segmented by every dimension, by device for example.

In GA4, you find the campaigns under Reports > Acquisition > Overview via the link View Google Ads campaigns. Cost and clicks live in the Advertising section under Key event performance with Google Ads selected as the product, which is only available on desktop (Google help).

If a visitor declines consent, their data is missing from both tools at first. Whether Google models it depends on your setup and your data volume.

  • GA4 only models behavior if Consent Mode runs in advanced mode on all pages, meaning the tags load before the banner. In addition, the property needs at least 1,000 events per day with analytics_storage='denied' for at least 7 days, and at least 1,000 daily users with consent on at least 7 of the last 28 days, with no guarantee. You only see modeled data with the "Blended" reporting identity (Google help on behavioral modeling).
  • Google Ads models conversions if Consent Mode is implemented correctly. As the threshold, Google names 700 ad clicks over a 7-day period, per country and domain grouping. Modeled conversions go straight into the "Conversions" column (Google help on conversion modeling).

For smaller accounts this means the gap left by declined consent often simply stays a gap. Basic or advanced mode is a data protection decision under German and EU law, and I cover the trade-off in the Consent Mode article. How courts have ruled on consent and cookie banners so far is laid out in my timeline of tracking rulings. This is not legal advice; if in doubt, clarify it with your data protection officer.

Common errors and how to fix them

SymptomCommon causeFix
No Google Ads data in GA4Link missing or less than 48 hours old, auto-tagging offCheck account and date linked under Google Ads links, turn on auto-tagging
Campaign, cost or clicks as "(not set)"Clicks from an unlinked Ads account, incomplete UTM parameters, clicks with WBRAID or GBRAIDLink all advertising accounts (for Demand Gen also the manager account), complete UTM parameters as a fallback
Session source/medium "(not set)", traffic under Unassignedsession_start missing, for example because the GA4 tag in Tag Manager does not fire on the Initialization trigger, or the banner sends a default instead of an update after the clickPut the GA4 tag on the Initialization trigger for all pages, send update after the banner decision
Ad clicks show as organic or direct, "google / cpc" missingGCLID lost in a redirect, no UTM parameters as a fallbackTest the landing page with ?gclid=TesTER-123, make redirects keep parameters
Ads account does not appear when linkingAdmin access or Editor role missing, wrong Google account signed inSign in correctly, get permissions added or request the link
Imported conversion missing from "Conversions"Action is secondary or less than 24 hours old, event not marked as key eventCheck action optimization, mark the event, wait a day
Twice as many conversions as ordersGoogle Ads tag and GA4 import both primarySet one action to secondary
Daily figures do not matchProperty and Ads account use different time zonesCheck time zones, compare longer periods
GA4 revenue shown in US dollarsThe property's default currency is US dollarsSet the currency to euro in the property settings

Table scrolls sideways

Google describes the GCLID test itself in its help on missing Ads data: if the parameter does not stay in the URL exactly as typed, including upper and lower case, your website is losing the click ID. According to Google, changing the currency in GA4 also converts historical data (Google help on currencies), and Google Ads always reports conversion values in your billing currency.

Why GA4 and Google Ads never show the same numbers

Many differences are not errors but the result of different counting methods. In its help on conversion imports, Google explicitly calls them normal, even with a correct setup.

CauseGoogle AdsGA4
Date assignedDate of the clickDate of the conversion
Channels creditedDefault: Google paid channelsDefault in reports: paid and organic channels
Counting method"One" or "Every" per clickEvery event
Time windowConversion window 1 to 90 days, cookies 90 daysCookies up to 2 years, lookback 30 or 90 days
What is measuredClicks, invalid clicks filtered outSessions and users
Time zoneTime zone of the Ads accountTime zone of the property

Table scrolls sideways

An example from Google's help: click on 19 July, purchase on 20 July. Google Ads records the conversion on the 19th, GA4 on the 20th. For a fair comparison, use the "All conv. (by conv. time)" column in Google Ads. Clicks and sessions are different metrics too: GA4 may count two clicks within 30 minutes as one session (Google help on clicks and sessions).

As for the attribution model, data-driven attribution is the default for most conversion actions in Google Ads (Google help). In GA4, since November 2023 only data-driven and last click remain, under Admin > Data display > Events > Attribution settings (Google help). What is behind the models is explained in my article on attribution in Google Ads and in the glossary entry on the attribution model.

  • Under Google Ads links, the right account is listed (for agencies the manager account), linked more than 48 hours ago.
  • Auto-tagging is on in every advertising account.
  • A landing page with ?gclid=TesTER-123 loads and the parameter stays unchanged.
  • In GA4 under Acquisition, your campaigns show up by name, not as "(not set)".
  • Key events that were marked automatically have been reviewed.
  • There is exactly one primary conversion action per business outcome.
  • Time zone and currency of the property and the Ads account match.
  • If you run remarketing, your GA4 audiences are visible in Google Ads.

The link is done in a few minutes, whether in GA4 or through the Data manager. The quality of your data depends on what comes after. Does the GCLID reach the landing page? Does each sale count as exactly one primary conversion? If both are true, the remaining differences between GA4 and Google Ads are normal and explainable. Duplicate conversions or campaigns showing up as organic traffic are not.

If you would rather not untangle this yourself: in my Google Ads tracking service I set up the link, the conversion import and the consent signals properly. If you first want to know where things go wrong in your account, I also check tracking as part of a Google Ads audit from €500.

Frequently asked questions

In GA4 under Admin > Product links > Google Ads links, or in Google Ads via the tools icon, then Data manager and + Connect Product. Both paths create the same link. In GA4 you can turn on auto-tagging in the same dialog, which is why I usually go that way. According to Google, Google Ads data is available in GA4 within 48 hours.

Mijo Jurisic

Google Ads consultant & founder of MJ Marketing. 5+ years of hands-on practice: from a self-taught start to advising direct Google Ads customers on behalf of Google. 500+ Google Ads accounts and €22M in media spend managed across the career.

Related Articles